Recent content by Bitty

You should turn off your machine and unplug it from the wall. Wait 15 seconds. Using something like a flat-bladed screwdriver or jumper, short the two pins for 5-10 seconds. Remove the jumper, if used. Plug back into the mains, turn on and go in to the BIOS and redo your settings or just leave...

I am using a DS3 with a 20-pin Enermax 470w psu and all is fine - oclockn too. You can if you want get a 20 to 24 converter very cheap.

Skinnyj Yes on a DS3. It was quite difficult to fit when I installed it in an Asrock Dual Vsta board. In the DS3 board it was much eaiser since I was patient and understood better how to fit it. I fitted the memory first since slot 0 is slightly obstructed. Once in place though it is solid...

The NB can be cooled the cpu cooler if you have say a Blue Orb II. This is a large cooler with a 12cm fan which blows air down onto the the cpu and the surrounding components, eg NB and RAM. I have not tested the temps but it seems reasonable that the air flow does help cool them. My case panel...

a2Willia, That happened to me. Indeed, since my agp 6800gt card had been misbehaving anyway I went out and bought a new one (x1900xt) thinking the old one had simply died. A few days later, I accidentally touched a sata cable and the screen went blank with a flashing underscore and I could...