Recent content by BeAsTy

w00t w00t.. my 1700+ came in last night... put it into the chaintech 7NJS board (I know it doesn't have a multiplier option in bios... but they're putting it in with new update ^^). I was able to get 166fsb on default core... now I'm on 1.7volt and running @ 180fsb(2.0ghz) =) . I'm using a...

w00t w00t.. my 1700+ came in last night... put it into the chaintech 7NJS board (I know it doesn't have a multiplier option in bios... but they're putting it in with new update ^^). I was able to get 166fsb on default core... now I'm on 1.7volt and running @ 180fsb(2.0ghz) =) . I'm using a...

The connector is a seperate adapter... it's not in the usual atx stack.. cuz it makes it easier for Asus to include the video connector w/o redo'in the atx stack... if u look on other pics.. the adapter is there w/ a lil cable that connects to mobo =)

Looks like bad power supply, try swapping that. GF4 4600's draw lotsa power.. so when u run 3d stuff and tax ur card.. it's draws more off ur board... and i guess power supply can't keep up =/

don't use it... only thing it good for is validating your proc for warranty... which it doesn't do a good job @ either.. cuz amd is like =S w/ warranty... maybe from vendor tho

=/... i dunno tho, if u look @ the code.. it's the AXDA1700Box unlike the Pali's which are AX1700Box.. maybe it's just tbred Retail instead of OEM, and it's typo on the 333bus... *As of 2pm today (11/12) they changed it from 333bus to 266bus.. hehe.. guess it just Tbred Retail

http://www.newegg.com/app/viewproduct.asp?description=N82E16819103352 <~ am i seeing straight?? or does it say bus:333mhz

http://www.newegg.com/app/viewproduct.asp?description=N82E16819103352 <~ am i seeing straight?? or does it say bus:333mhz

Don't bother with the 2.0A's... i tried oc'ing mine and my friends too, *sighz* i can only get mine to 2.5(125fsb)stable with 1.75vcore... but i only run @ 2.3(115fsb) with 1.625vcore... memory @ 2-2-5 1T, =/ ... my friend's 2.0A won't even go 110 bus with 1.75 =X

I'm tryin to look at the voltage/heat differences between the Mobile Duron 1GHZ, and the Mobile XP 1600+.. since the XP's are on .13 micron, i would think it would run cool enuf to swap with the 1ghz duron in my lappie right now.. =/... any1 got a site that has a list of the two proc's volt and...

that's weird for pcmark.. cuz i compared an oc'ed 1600+ runnin @ 166fsb (which makes it 1743mhz) which is roughly a 2100+... and i had some1's stock 2100+ to compare to on the same motherboard... the 1600+ @ 166fsb got an over 400 gain on the stock 2100+ @ 133fsb... =/

I'm usin my stock w/ as3 and it's a 2.0A @ 2.4.. the temps idle around 38-39.. so its' fine.. too bad proc can't go higher tho.. don't u have agp/pci locK? ... o yea.. good luck tryin to hit 133fsb w/ that thing... it's not very good @ it.. =/ highest i was able to get mine was 125fsb and 121fsb...

After reading the article and confirming thru email to the author, it appears the Soyo Dragon KT400 has a 1/6 divider!!!! No more ali magik!! :D

only mobo i know w/ the 1/6pci divider is the IWill Magik1 board.. but then it's an Ali chipset.. so even when cranked to 200... it's still fares barely as well as a KT @ 166fsb

Turn your FSB to 133mhz in bios!! Most is default'ed to 100mhz fsb ... i've seen this posted time after time by people in 40 different fashions. I think we should sticky this so people don't have to waste posts and time to solve the same problem 100 times ^^