Recent content by BarboBot

Sorry for not posting sooner the test is over and the results are in (I hit rock bottom for the test at 1.10v no matter what i set it at the cpu wouldn't run on anything less than 1.10v, it would be set in bios to .05v it would be running at 1.10v so with that said here they are)...

cause this method is allowing me to go lower more stabily and i'm aiming for stability so i'm trying to get the most results from a stock voltage or less this process is aimed at letting me get a stable burn in at less than 1v from the results i'm getting thus far. but what you're trying to...

here we idle temps at 1.10v! http://pics.apartment808.com/users/Barbobot/Snap3.gif . booted up totally stable once again i think i'm gonna run prime95 and cpu burn in at the same time for added stress (prime95's torture test doesn't really torture too much imo)

here is another pic for ya http://pics.apartment808.com/users/Barbobot/Snap2.gif - initial load temp 35c

ohhh and here is some even better proof for ya (yeah you got it screenies!) http://pics.apartment808.com/users/Barbobot/Snap1.gif - 1.2v CPU-Z, 1.36 Asus Probe with temp read out there for ya. and by the way that article you guys are priding yourselves with as the be all end all to cpu burn...

omg all you have to do is read the threads that i've posted i'm not saying it 100% does work, but i find it highly unprobable that that many people can be equally decieved by that method (most of which are far more or as knowledgeable as the 70% of the people in this forum)

i'm not a big fan of cool n quiet seeing as to how i couldn't lower the voltages any lower then 1.375 with it on and i've heard its not good for overclocking in its present state

lmao this is bad vegitto but one more question (the program works friggin great btw) how do i post the pix i've got the ones you wanna see (well below 1.2v)

lmao sorry man maybe my terminology is a little off, but bare with (the results are there) thanks a million Vegitto lemme get that installed on my comp right quick and i'll have you screenies for the last part of this testing session :)

isn't there a decent little program that i can use to get screenies to post :( i've got started my 1.16v burn in session tried the print screen method to no avail i'm gonna check and see if i can find a screen capture prog to download.

yeah thats not workin for me at all i hit print screen button and nothing happends :(

whats a good screen capture program? (the smaller and simpler the better)

ok here is my situation up until recently i could find the fans i was looking for at local shops so i had never ordered them. I ordered a planaflow 90mm fan with my xp-90 heat sink this time i got the fan but it didn't have the connectors for it (4 pin or 3 prong) not having time and being in a...

yeah need to get a good screen capture prog (any suggestions) and i will be happy to my comp is currently bare except for BF2 and overclocking/burn in progs. just about halfway into the 1.20v burn in session 30c idle 35c load. just put filters on my intake fans so the case temp is up a little...