After reading this, I checked out how my caps are doing, and one of them is swelling, so I'm ordering these and replacing it...
Thanks for the heads up!
I have a cap that's swelling and I want to replace it before it becomes a problem, it's a 6.3v 3300uf cap rated for 105c. I found this on ebay and I was wondering if it's ok... (mine also says KZG on it...)
Also any general tips/recommendations would be great (like a link to a guide...)
Thanks!
I started having problems last week where my comp would freeze randomly, and to make a long story short it turned out to be the SATA cable attached to my OS hard drive. I replaced it and everything is fine, this is the cable that I got with my mobo and I just thought that I'd let everybody know...
that's chinese to me...
In the bios I can choose whether sata ports 0-3 are "raid", "ahci" or "ide" and under that I have the option to make ports 4-5 either "same as 0-3" or "ide" (port 5 is the esata port on the back) so i made the first one raid and the second one ide so that only gives me...
I originally posted this in CPUs but was advised to post it here also...
In power management I lowered the minimum processor state to 30% and the proc speed drops to 1000MHz but after a couple of hours I check again and it's at 3200MHz, I look in power management and lo and behold the minimum...
In power management I lowered the minimum processor state to 30% and the proc speed drops to 1000MHz but after a couple of hours I check again and it's at 3200MHz, I look in power management and lo and behold the minimum processor state is back up to 100% again but all the other power settings...
I made a RAID 0 array and in the BIOS there is an option where I choose to turn on RAID to make SATA ports 4 and 5 work independently of the RAID array (4 is a regular port and 5 is an eSATA port in the back) but I need 2 SATA ports for optical drives...
How do I do that???
TIA
I posted this in a different thread but this thread might be a better place:
This sux (refering to the latest article,where it says that this board may not support 6400+) I just ordered a gigabyte GA-MA78GM-S2H and a 6400+ and according to this article I may have serious problems, should I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.