Recent content by apapnan

My S3 1x512 Mb DDR maxes out at about 212 MHz in slot 1 alone. Nothing changes if I add the S3 256 Mb in slot 2 or 3. I used 3.0-4-4-14 (if I rember well) or longer but it is the same. I could give a try with the 256 M alone... just to see.. As far as I know the memory controller is on board...

I must be very unlucky!!! Move RAM to 1,3 didn t help too. I tried with 1x512 in slot 1 only and then added 256 in slot 3 (where I left it) but nothing changes. So now the system runs at "best" with 2.390 GHz CPU and 400 MHz (!) DDR. I remind that it is DDR500... and I don t understand...

Yes, now memory is 1,2, I'll give a try moving sticks around. I have done some more tests and seen that, under heavy load, CPU temp. can reach 55°C with air cooling. Do you think that this temp. can impair stability? I mean dunno if a better cooling can give some advantage in my system...

I have been surprised by the low overclock performances I could get out of my Asus K8N-E Deluxe. My system: Athlon 64 3200+ 2.2G 640K cache K8N-E Deluxe, BIOS 1004 512 + 256 M S3 DDR 500 Matrox 80 M PATA 133 First I tried to find out max speed of the processor: HT=3/4 DDR 333 MHz...