Recent content by andyhi

Default for the RTL9210 enclosures I own: Led flashing slow in low power mode. See post 851 for a config change to have the LED turn off in lower power mode. Feel free to try different values for SUSPEND_LED_OFF... you may find a previously undocumented setting or Slow Flash & Off may be the...

I did the v1.29.12 testing on my EC-SNVE with a 970 evo plus. Led lights up when connected, blinks when reading/writing, but unfortunately stays lit after soft eject. You might want to check your .cfg file and/or current running config to see if the led flags are different from mine below...

Update concerning the RTL9210 v1.29.12 firmware mentioned above... I flashed 1.29.12 to a Sabrent EC-SNVE. No major issues so far. Used the SA8307.cfg file from Sabrent's 1.25.7 f/w update package as a reference. Dumped device info / cfg for comparison and tweaked DISK_IPS_THRES to 1 minute...

It appears Station Drivers has v1.29.8 and 1.29.12 available for the RTL9210. https://www.station-drivers.com/index.php/en/outils/Drivers/Realtek/NVMe-USB-3.1/Realtek-RTL9210-NVMe-USB-3.1-Controller-firmware-Version-1.29.12/lang,en-gb/ From the notes on the SD download page: Version...

Could be the firmware. Could be OS security updates / CPU microcode mitigations for the spectre/meltdown series of side channel attacks that keep coming. Also could be your SSD if it's been used a lot and the cells are aging. In other news... There is some interesting work happening with...

I have an Orico with the 9210b that supports both m.2 NVME and SATA. I flashed the v1.23.15 bin posted a few pages back. The zip file has two flash images... UTNVME_A_vXXX.bin and UTNVME_B_vXXX.bin. I assume the one with "B" in the name is for the 9210b. I don't recall having to choose one...

I gave them partially negative feedback in the NewEgg review. Orico responded to another purchasers negative reivew. I doubt it will make a difference, but maybe they will respond to public shaming ;) I really like the enclosure I purchased... the design isn't perfect but it's great for the...

Thanks for reporting the newer firmware on your device. Does the LED power off when you perform a software device eject/remove from windows? I just submitted a request for updated firmware from the Orico support site based on the issue I was having with v1.21.10. I mentioned v1.24.2. I'm not...

I purchased the ORICO M2PJM-C3 from Newegg in December. I wanted a single external enclosure with both NVMe and SATA support for occasional data copy/recovery for drives pulled from other computers. Metal enclosure, comes with thermal pad, RTL9210b chip which supports NVMe and SATA. Can...

See this thread about people asking questions related to lower than expected M1 USB-C speeds... Might be firmware/driver related on M1 USB-C ports or could be misunderstanding / misrepresentation of the M1's USB-C capabilities. gen 1 / gen 2 / (1 ) 5gpbs lane vs (2) 5gpbs lanes, TB4, etc...