Recent content by anandus

The other settings were default :) I also tried it with all the settings set to max, and there was a noticable difference in the graphics quality between the DX10- and the DX9-version, DX10 looked a lot better! But came at a price. Framerates were: Snow - 9 Cave - 12

I just tried both the DirectX9 and the DirectX10 versions, and the first thing I noticed was: Absolutely no difference in image quality!!! Anyway, My setup is: E6300 MSI 8800GTS320 OC 2Gb DDR2 Gamesettings: 1280x720 4xAA 16xAF HDR - Medium Results: DirectX10 - Snow: 47fps...

Thanks :) With these settings I've got it running stable on 310Mhz FSB. It boots quite stable into Vista on 315Mhz, but fails in Prime95 after a while. On 310Mhz Everything is rocksolid, including Prime95 (running 2 of them, one for eacht core). Before I couldn't even get past 295Mhz, so...

Maybe it's your PSU? How many Watts is your PSU?

So no one has tried the new bios (1.70) out? I'm curious if there are any new FSB-frequencies added :)

From what I heard the E6300 clocks quite well, but this board has two faults: * It only goes up to 340Mhz FSB * You can't adjust the CPU-voltage. (If I heard things correctly). So basically you're stuck with 2,4Ghz. Which isn't that bad ;)

Is it an AGP or a PCIe card? If it's a PCIe-card, better check here to see if it's supported? (Although that list is far from complete and if your card isn't mentioned it doesn't have to mean anything at all :P )

What does this new bios do? On the Asrock site it says "Support new clock gen.". Does this means you can clock higher than 340Mhz FSB?