Recent content by agawtrip

  1. A

    Please comment on my overclocked x2 5000+

    http://i43.tinypic.com/15qvtqu.jpg asus probe got the highest reading (40 deg) while hmonitor has two readings 40(CPU) and 14(cpu0) it's in idle at stock speed. isn't that 40 deg is hot for that? i dont know the room temp but its cold and raining outside.
  2. A

    Please comment on my overclocked x2 5000+

    http://i44.tinypic.com/1ot4iq.jpg i looked at the temp in BIOS. it's 47 degrees while the cpu is constant at 1.4v, stock speed no OC. none of the utilities monitored the same temp. iguess it's because the cpu is 1.4v. CnQ is enabled. why is the cpu is running at 1.4v?
  3. A

    AMD Socket AM2+??

    Phenom II 940 BE is AM2+, it has 940 pins. you can't put it on AM3 boards because of the additional pins. AM3 only has 938 pins. but AM3 cpus will fit on AM2+ motherboards, you only need to update the bios. if you dont want to do that or you don't know how to do that, get the 940 BE together...
  4. A

    Please comment on my overclocked x2 5000+

    Temperatures i monitored the temps using different cpu monitoring utilities at stock clock. i guess those were the best cpu monitoring utilities, but they have different readings... coretemp - 65-68 cpuidhw - 67-65 hmonitor - 58 (cpu0 - 47) everest - 44-47...
  5. A

    Please comment on my overclocked x2 5000+

    OC stress 1 OC stress 2 AMD Athlon X2 5000+ 2.6GHz ASUS M2N68-CM motherboard Kingstong 2GB DDR2-800 memory please comment or give me recommendations on my overclocking is there something im doing wrong? what about the memory and timing? is it ok run it beyond 400MHz? and the...
  6. A

    Intel Q6600 on P4M900 Chipset

    same chipset http://en.wikipedia.org/wiki/Chipset different cpu support on different manufacturers. why? and also, the case on x6800 is the same with the q6600. if you would check the cpu support lists, others support it, others does not. thanks for the reply anyway.
  7. A

    Intel Q6600 on P4M900 Chipset

    can i put an intel quad Q6600 / Q6700 on my ECS P4M900T-M2 mobo? ECS CPU support BIOS for intel E5200 45nm Foxconn mobos with P4M900 chipset - core 2 quad supported i've search other mobo manufacturer with the same chipset but it is not supported. gigabyte p4m900 cpu support ASUS...
  8. A

    3dmark 06 and new graphics

    XP or Vista?
  9. A

    HyperMmemory TurboCache - useless?

    all of us will agree that low end /midrange cards with 128-bit memory bus cannot fully utilize the 512MB/1GB video memory. so what will you gain from turbocache/hypermemory up to 1GB? it's useless, isn't it? 256MB is enough. sapphire 3650 is there any utility so i can disable the...
  10. A

    palit 8500gt sonic ddr3, is it good?

    8500gt sonic ddr3 http://en.wikipedia.org/wiki/DDR3_SDRAM 128 bit, 600 MHz core clock, 1.2 GHz memory clock, 16 stream processor 8600gt 1GB ddr2 DDR2 SDRAM 128 bit, 540 MHz core clock, 800 MHz memory clock, 32 stream i calculated the memory transfer rate and 8500gt sonic has 19.2...
  11. A

    palit 8500gt sonic ddr3, is it good?

    thanks for your comments and suggestions. i've seen 8500 gt playing the witcher on youtube and more videocards of the same level (7600gs, 1650pro) playing cysis and other modern games. i don't know if those were edited vids but it's so suprising.
  12. A

    palit 8500gt sonic ddr3, is it good?

    anyone has the palit 8500gt sonic ddr3?? how is it?? i've read lots of comments about 8500gt(stock clock) and all of them say it is a bad, weak card especially for gaming. is the sonic/overclock edition would make any difference? how about the 7600gs?? which is better?? stores here only...
  13. A

    is 350w power supply enough for this setup??

    nice observation man, and thnx for the suggestions. i'm about to start studying maya at its basic level when i got the PC then maybe when i get into professional level then i might upgrade my pc. for games i'm just a casual gamer. kanes wrath is fine with me and also prostreet. the power...
  14. A

    is 350w power supply enough for this setup??

    intel e2180 2ghz asus p5vd2 vm-se asus p5vd2 vm-se inno3d / palit 8500gt 512mb kingston 1gb ddr2-667 1 normal size auxiliary fan no dvd/cd drive is 350w power supply enough for this setup? (for gaming and maya/3ds max) thanks