Recent content by a Bill

drvconfig

I just use traceroute and whois.

GM was using 8mhz CPUs a while back. An aftermarket computer I was using ran at 16 mhz. You really can't compare a cars computer to a desktop, like was mentioned earlier, cars use tables.

That is an excellent NIC, you will have no problems with it.

Is this OK for a Klipsch ProMedia 2.1? $180 shipped. Here I hope that came out right.

ArkAoss The 10mbps hub has greater bandwidth than your internet connect :D Unless you have an OC48 that is. A T1 is 1.5mbps and your 10Base hub is 10mbps, see the disparity? You aren't limiting anyone except on huge local file transfers. That was just an FYI and a bump for a good deal ;)

^bump

I need suggestions for a lower end server motherboard. It will need to meet these criteria, has a RAID slot (not onboard SCSI, just the extended slot to allow RAID cards) can use a single Slot 1 P3 600, ATX format and stable. Integrated video etc is OK but not important. Just point me to a make...

You might want to shop around a little. I found two vendors that almost matched that price without two for one. Buy.com with the $30 off is a little cheaper but if you don't need two switches? http://www.egghead.com/category/inv/00043111/03297376.htm

Nibbling tool.

http://www.techbargains.com/

A 32 meg V3 2K? Weird question. At least the AGP/PCI query was good :)

Xeons are stable but of no real use to most folks. Their RC5 output is identical to its counterpart at the same mhz. For example, the 400 mhz Xeons I use at home only put out as many RC5 blocks as a plain old 400 mhz CPU. The 1 meg L2 cache on each CPU I have never comes into play. The ones I...

G4's rock. I had a 450 mhz unit (until the art department determined it was missing :)) and it was cracking 3.9 MKeys 24/7. That was back in February or so. I sure miss that box, I never cared much for Macs until the G4.

Home... PII450 PII450 Dual PII 400/1m Xeons P3 500 Work... P3 450 P3 450 C366 Dual P3 800 Dual P3 700/1m Xeons P3 700/512k Xeon