Search results

Thanks for all the replies.. I'll give that VideoReDo a shot..

Thanks for the reply.. Sounds like I would need to sit through the span of video that I want to extract? As it's just "recording" ?

What is the best software to extract scenes from video files without having to re-encode the entire video etc? Mostly mkv, mp4, etc.. The standard file types.. I know it can be done in Windows Movie Maker, VideoPad, etc but didn't know if there was one that is a lot faster where I can just...

And yes, it's a PERC.

?? Basically I have 9 drives.. I have no idea what drives go to what server and what slots go to what.. I have the working server but without knowing the above I'm stuck..

A customer of ours had a server die (Dell PowerEdge 2850).. He had another 2850 so he decided to take the drives out of the dead and put it into the working one.. That didn't work.. When that didn't work he started moving drives all around.. So that's when I got brought in.. I have a dead...

OK so I need to get this fixed.. I'm rebooting my router(s) almost daily and it's a major PITA.. What makes it worse is that I use a OBI100 so when my internet is jacked the wife complains about the phones.. I seem to have issues when I download stuff off usenet (utilizing my full pipe) and I...

When I can't get online but it stills shows I'm connected I can't ping or access either router. My basement router has the latest firmware (recently upgraded it) and the new one I just got this week and haven't checked yet.. But having same issues as before with the same basement router and am...

No.. I haven't specified any channels on either and each has their own SSID. Thanks for the replies.

So here is my current setup.. I have my internet feed coming into my basement (cable).. In that closet I have a D-Link DIR-655.. It's setup to do DHCP and it's address is .1.. On my main floor I have an OBI100 for VOIP.. Since it needs to be hard wired I have a run coming from my basement...

I'm looking for a new laptop and found someone selling a Dell M6600 for $700. Just wondering if that's a solid deal or not.. Been looking hard for 2-3 days and have had tons of offers but leaning towards this guy.. Appreciate any help.. Service tag is 550D5S1.. It's under warranty...

The DHCP server would hand out addresses to devices when it had addresses to give out.. The problem was the BAD_ADDRESS would fill up all available IPs.. When they were cleared out the machine(s) were able to get on.. The fact that the DHCP server logs had the router as the device doing the...

As long as all the addresses aren't taken up and users can get on they'll be happy.. What are you suggesting on the second part?

I believe I got it.. I had one of our network admins change that interface to no ip instead of DHCP and the bad_address hasn't appeared back, yet.. Thanks again for all the help fellas..

But none of the addresses ping.. They are all open.. I still think that may be the issue because I'm not sure why that interface would be requesting DHCP at all..

I've looked in the router, switch, and ASA and can't find anything related to an IP helper.. I searched for "Help" in the configs of all three.. Nothing.. What I did find, may / may not be something, is on the router (which is what is in the DHCP logs over and over): ! interface...

And another question.. Is there anyway (wireshark, logs, etc) to find out what PC(s) (mac address) is / are causing this?

Also, in the DHCP server log, it shows the router doing the requesting.. Is that normal? 10,08/20/12,00:29:26,Assign,192.168.1.105,MainRouter.abc.com,636973636F2D303031392E353630342E616163392D4769302F31,,4246732800,0,,, 13,08/20/12,00:29:26,Conflict,192.168.1.105,BAD_ADDRESS,,,0,6...

Thank you for the explanation.. I'm a little confused though.. Say PC1 has a bridged adapter.. It plugs in via ethernet and gets an address.. It then connects to the wifi and requests an address but the wired says it has it.. Wouldn't it just go to the next available and actually get the...

They do have a Cisco Aironet 1130AG AP.. Also, in DHCP I see (2) workstations that have (2) IP addresses each. I'm assuming their wireless adapter has one and the physical has the other.. I don't see that as being an issue, right? I mean, at the office here I often get on the network with both...

Here's a wireshark screen.. I can provide the actual file if someone is willing to look at it..

I have installed and run wireshark on it.. It's really not leading me to anything.. I'll post a capture tomorrow.

No, the addresses aren't pingable..

I did see in DHCP the same computer name with two IPs and figured one was just on the wifi network and one was on the wired network (both subnet).. I'm not sure how this would cause an issue though because I do this at work as well. Thanks for the reply.

I have a scope of 150 addresses and it is constantly getting filled with BAD_ADDRESS which causes the scope to be full and not have any addresses to give out.. I've run the roque server check and there are none. I'll delete all the "BAD_ADDRESS" entries and within 10 minutes they will be...

Not sure. Looks like XP doens't support it, only Windows 7.. Wouldn't a full format (not quick) before installing Windows erase all the data though? I think it's definitely something to do with the motherboard.. I've tried formatting and reinstalling twice, that didn't fix it.. I...

But I did a format and fresh install of Windows and that's when I have the issue..

I have a SUPER TALENT MasterDrive OX FTM16GL25H 2.5" 16GB SATA SSD.. I installed it on my one PC and the boot times were great. Upon booting it would show the Windows XP logo with the progress bar for like 4 seconds and I was in Windows in under 20 seconds.. I took an image of that PC with...

They why not exclude every other update from Windows Update and just make everyone get SP3, if that is a good reason why not to include it..

Yup, patch fixed it.. Thanks fellas.. Freaking M$ft.. Why not include that in Windows Update!?

Yea, sorry.. I haven't had a chance to test if it could do just WPA yet.. I have a feeling I won't have to yet as I remember having to do this before.

I think this is it! I remember when I originally installed XP on the PC I'm working on I had a similar issue.. It was about 2 years ago so I didn't remember exactly what I had done but now that you post this I do remember having to install a patch to get my wifi working.. I had thought...

This is unbelievable how much of a PITA this is! Why is something this simple giving me such a hard time? I got it to give me a different error now when I try to connect.. It at least brings up the password boxes but when I put in the CORRECT password it gives me: "The network password...

Huh? I know that... Usually when windows finds a network and double click to join it just asks you for the key.. It doesn't do any of that and just gives me that error.

Yes, it works fine when I disable the security.. What next? Thanks

I have an ENCORE ENUWI-G2 IEEE USB wifi card.. When I install the drivers and then try to connect to my Wifi with Windows wireless tool it shows my network, I double click to connect, and instead of it bringing up the window to enter my key I get: "Windows is unable to connect to the...

I can't figure out what the heck is up with my Wifi.. I have a Buffalo WHR-HP-G54. I had DD-WRT (tried multiple version) and recently switched over to Tomato.. I have two wireless PC's on my network and one wired.. My wired PC gets 10MB down and 1MB up via the Internet.. My two wired...

Wow, really? I'm reading the opposite. I've read a couple sites that put it close to the top. How long did you use it? What did you go to since you didn't like it? Thanks

Giving a bump to this thread.. We've used CA for 6+ years.. Currently using Etrust ITM 8.1 on about 1,000 nodes (Windows 2003, Windows XP, and Exchange 2003). Our maintenance is up and instead of renewing I'm looking to switch.. We've had A LOT of issues over the years with them and I'm not...

I do see this every once in a while in the eventvwr: "An error was detected on device \Device\Harddisk2\D during a paging operation." I ran Seatools and the Western Digital tool and both pass.. WTH?